Skip to content
ABCDEFGH
jaimebuildsthings.dev
01 Projects02 About03 Log04 ContactGitHub ↗
01Projects02About03Log04Contact↗GitHub
← Revision log
Tag · 6 entries

pit-pyro

  • pit-pyro 6
  • electronics 4
  • hardware 3
  • soldering 3
  • 3d-printing 2
  • astro 1
  • corner-scales 1
  • firmware 1
  • github-pages 1
  • meta 1
  • pcb 1
RevDateEntryRead
H2026-11-12Pit-pyro: the screen testThe screen was the last part I had not seen working. It now shows what the thermal sensor sees, with the hottest, average and coldest temperatures next to it.2 min →G2026-11-12Pit-pyro: test-fitting the enclosureA friend printed the first full enclosure. I fitted every part into it, broke the menu button holder, and fixed five things in the model.4 min →F2026-10-31Pit-pyro: building the sensor boardThe custom circuit boards for the thermal sensor arrived. I built one and read frames from it on the Feather.2 min →E2026-10-24Pit-pyro: the desk test, day twoA third sensor, this time with the capacitors I skipped on day one. The stripes are gone, and the sensor is getting its own small circuit board.3 min →D2026-10-23Pit-pyro: the desk test, day oneBefore the enclosure, the electronics get tested on the desk. Day one was the thermal camera: one sensor lost, a second one wired straight to its legs, and the first thermal image.5 min →C2026-10-22Pit-pyro: measuring the real partsI measured every part with calipers before the first print. Two of them were much bigger than the model assumed, so I redesigned the enclosure around them.6 min →
Projectjaimebuildsthings.dev
Drawn byJaime
SheetLOG
RevH
FeedRSS ↗
©2026